Tag Archives: mod

TERA: 8D Sound Access Automation

Channel 6: Automation of Chorus (Rate, Depth, Level, Delay, Feedback, Spread), LFO1 (Rate) & some more

Channel 11: Automation of some parameters

Channel 16: Automation of 79 parameters


A-145 LFO

A-145 LFO

“Module A-145-1 is a low frequency oscillator, which produces cyclical control voltages in a very wide range of frequencies. Five waveforms are available: sawtooth, inverted sawtooth, triangle, sine and square wave.
The LFO can be used as a modulation source for any number of modules – for instance modulating the pulse width or frequency of a VCO, modulation of the cut-off frequency of a VCF, or amplitude modulation with a VCA.
A three-way switch lets you select three frequency ranges, spanning from one cycle every several minutes at the lowest, to moderate audio frequency at the highest (about 4-5 kHz).
The LFO signal can also be synchronised, via the reset input.

Typical frequency ranges depending upon the position of the Frequ. Range switch:

H: about 10Hz – 4.5kHz

M: about 0.1Hz (10 seconds period) – 50Hz

L: about 0.005 Hz (3.5 minutes period) – 5Hz”

Model H910 Harmonizer

Model H910 Harmonizer

“H910 Harmonizer

“F@*ks with the Fabric of Time”

The H910 Harmonizer® was the world’s first digital effects processor. With its unique combinations of pitch shifting, modulation and delay, the H910 can be heard on countless ground-breaking works by artists from AC/DC to David Bowie to Frank Zappa. Simply put, nothing sounds quite like it.

A powerful creative tool, the H910 plug-in is a faithful recreation of the original hardware. Use the H910’s pitch changing ability to create specific musical intervals and harmonies, spread guitars, fatten snares, apply subtle organic de-tuning to synths or add slap-back delays to vocals. At extreme settings, you can create unheard-of mechanical sounds and drone effects using self-oscillation, delay, and anti-feedback.
Continue reading Model H910 Harmonizer